Hersteller: Danfoss
Produktionsland: Dänemark
Zustand: NEU und mit Originalverpackung
Materialnummer: 11106111
Typenschlüssel: Nein
Motorserie: O-Serie
Basismotor: OMT FH
Schluckvolumen: 250
Designnummer: 2
Aktiv: Ja
Ersetzt durch: Nein
Montageflansch: Bremse-Standard ; PD 125 mm ; BC 160 mm
Montageflansch Dimension: Nein
Wellentyp: Zylindrisch
Wellengröße: 40 mm ; M12 x 1,75 Innengewinde
Passfeder: A12 x 8 x 70 mm (DIN 6885)
Anschlußtyp: Seitenanschluß
Anschlußgröße: G 3/4
Leckölanschlußtyp: Standard
Leckölanschlußgröße: G 1/4
Bremsenanschluß: Standard
Bremsenanschlußgröße: G 1/4
Lackierung: Nein
Sonderausführung 1: Release port - position
Sonderausführung 2: Nein
Sonderausführung 3: Nein
Staubdichtung: Standard
Wellendichtung: NBR - Standard
Dichtsatz: 151B0154
Lagerung vorne: Kegelrollenlager
Lagerung hinten: Kegelrollenlager
Orbitalsatz: Standard
Rückschlagventil: Nein
Ventilfunktion: Nein
Interne Sonderausführung 1: Motor - Test Certificate 3.1
Interne Sonderausführung 2: Nein
Verpackung: Einzelverpackung
Optionen: Spezial
Activ: | No, Yes |
---|---|
Baureihe: | OMT FH |
Drain Port Style: | Standard - Bearing housing, Standard - motor flange |
Dust Seal: | Standard |
Front Bearing: | Tapered roller bearing |
Mounting Flange: | 4 Bolt - Square, Special |
Packaging: | Single pack |
Port Dimension: | G 1/4, G 3/4, G 3/8 |
Port Style: | Side ported - offset manifold (4 x M10) |
Schluckvolumen: | 250 cm3/U |
Seal Kit: | 151B0154 |
Serie: | O-Series |
Shaft Key: | A12 x 8 x 70 mm |
Shaft Seal: | NBR - Standard |
Shaft Size: | Dia. 40 mm - M12 tap |
Shaft Style: | Straight |
Special Features External 1: | Release port - position |
Special Features Internal 1: | Motor - Test Certificate 3.1 |
Design: | 2 |
Mounting Thread Dimension: | Pilot dia. 125 x 10 [4,92 x 0,39] - B.C. dia. 160 [6,30] ; Dia. 14 [0,55] |
Typenschl?ssel: | None |
Anmelden