Hersteller: Danfoss
Produktionsland: Dänemark
Zustand: NEU und mit Originalverpackung
Materialnummer: 11006096
Typenschlüssel: Nein
Motorserie: O-Serie
Basismotor: OMP
Schluckvolumen: 160
Designnummer: 7
Aktiv: Ja
Ersetzt durch: Nein
Montageflansch: C
Montageflansch Dimension: M10
Wellentyp: Kegelform - Konus 1:10
Wellengröße: 28,5 mm Innengewinde
Passfeder: B5 x 5 x 14 mm (DIN 6885)
Anschlußtyp: Endanschluß
Anschlußgröße: G 1/2
Leckölanschlußtyp: Standard
Leckölanschlußgröße: G 1/4
Bremsenanschluß: Nein
Bremsenanschlußgröße: Nein
Lackierung: Schwarz (RAL 9005) - C2
Sonderausführung 1: Nein
Sonderausführung 2: Nein
Sonderausführung 3: Nein
Staubdichtung: Standard - HPS
Wellendichtung: HNBR - HPS
Dichtsatz: 151-1279
Lagerung vorne: Gleitlager
Lagerung hinten: Gleitlager
Orbitalsatz: Standard
Rückschlagventil: Ja
Ventilfunktion: Nein
Interne Sonderausführung 1: Nein
Interne Sonderausführung 2: Nein
Verpackung: Industieverpackung - 48 pcs (Einzelverpackung - 11189447)
Optionen: Spezial
Activ: | Yes |
---|---|
Baureihe: | OMP |
Drain Port Style: | Standard - end cover |
Dust Seal: | Standard |
Front Bearing: | Journal bearing |
Mounting Flange: | 4 Bolt - Square, Special |
Packaging: | Industry - 48 pcs |
Painted: | Black - RAL 9005 |
Port Dimension: | G 1/2, G 1/4 |
Port Style: | End ported - aligned |
Schluckvolumen: | 160 cm3/U |
Seal Kit: | 151-1279 |
Serie: | O-Series |
Shaft Key: | B5 x 5 x 14 mm |
Shaft Seal: | HNBR - High pressure |
Shaft Size: | Dia. 28,5 mm - M20 x 1,5 tap |
Shaft Style: | Tapered - Cone 1:10 |
Design: | 7 |
Mounting Thread Dimension: | Pilot dia. 44,4 x 2,5 [1,75 x 0,10] - B.C. dia. 82,6 [3,25] ; M 10 |
Typenschl?ssel: | None |
Anmelden