Danfoss 11007056 OMPW N 140 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11007056
Modelcode: None
Motorseries: O-Series
Basic Motor: OMPW N
Displacement: 140
Design Number: 7
Active: Yes
Replaced by: None
Mounting Flange: None
Mounting Thread Dimension: M10
Shaft Style: Tapered - Cone 1:10
Shaft Size: 28,5 mm tap
Shaft Key: B5 x 5 x 14 mm (DIN 6885)
Port Size: Side port - Aligned
Port Dimension: G 1/2
Drain Port Style: Standard
Drain port Dimension: G 1/4
Brake Release Port: None
Brake Release Port Dimension: None
Painted: Black (RAL 9005) - C2
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151-1275
Front bearing: Needle bearing
Rear bearing: Needle bearing
Gear wheel set: Standard
Check valve: Yes
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
| Activ: | Yes |
|---|---|
| Baureihe: | OMPW N |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Needle roller bearing |
| Mounting Flange: | 4 Bolt - Wheel, Special |
| Packaging: | Single pack |
| Painted: | Black - RAL 9005 |
| Port Dimension: | G 1/2, G 1/4 |
| Port Style: | Side ported - aligned |
| Schluckvolumen: | 140 cm3/U |
| Seal Kit: | 151-1275 |
| Serie: | O-Series |
| Shaft Key: | B5 x 5 x 14 mm |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 28,5 mm - M20 x 1,5 tap |
| Shaft Style: | Tapered - Cone 1:10 |
| Design: | 7 |
| Mounting Thread Dimension: | Pilot dia. 80 x 7,3 [3,15 x 0,29] - B.C. dia. 103 [4,06] ; M 10 |
| Typenschl?ssel: | None |
Login
