Danfoss 11007290 OMTW HD 400 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11007290
Modelcode: None
Motorseries: O-Series
Basic Motor: OMTW HD
Displacement: 400
Design Number: 2
Active: Yes
Replaced by: None
Mounting Flange: Wheel - PD 160 mm ; BC 200 mm
Mounting Thread Dimension: None
Shaft Style: Tapered - Cone 1:10
Shaft Size: 42 mm ; 3/4-16 UNF tap
Shaft Key: A12 x 8 x 50 mm (DIN 6885)
Port Size: Side port
Port Dimension: 1 1/16 - 12 UN
Drain Port Style: Standard
Drain port Dimension: 9/16 - 18 UNF
Brake Release Port: None
Brake Release Port Dimension: None
Painted: Black
Special Features External 1: Output shaft - length of cone
Special Features External 2: Output shaft - Thread
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151B0161
Front bearing: Tapered roller bearing
Rear bearing: Tapered roller bearing
Gear wheel set: Standard
Check valve: Yes
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
| Activ: | Yes |
|---|---|
| Baureihe: | OMTW HD |
| Drain Port Style: | Standard - Bearing housing |
| Dust Seal: | Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - Wheel, Special |
| Packaging: | Single pack |
| Painted: | Black |
| Port Dimension: | 1 1/16 - 12 UN, 9/16 - 18 UNF |
| Port Style: | Side ported - offset |
| Schluckvolumen: | 400 cm3/U |
| Seal Kit: | 151B0161 |
| Serie: | O-Series |
| Shaft Key: | A12 x 8 x 50 mm |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 42 mm - 3/4-16 UNF tap |
| Shaft Style: | Tapered - Cone 1:10 |
| Design: | 2 |
| Mounting Thread Dimension: | Pilot dia. 160 x 7 [6,30 x 0,28] / 172 x 3,5 [6,77 x 0,14] - B.C. dia. 200 [7,87] ; Dia. 18 [0,71] |
| Typenschl?ssel: | None |
Login
