Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11010413
Modelcode: None
Motorseries: T-Series
Basic Motor: TMT V
Displacement: 500
Design Number: 0
Active: Yes
Replaced by: None
Mounting Flange: Spigot dia. 160 mm, BC dia. 200 mm
Mounting Thread Dimension: None
Shaft Style: Splined - 17T
Shaft Size: 1 1/2 inch ; 3/8-16 UNC tap
Shaft Key: None
Port Size: Side port
Port Dimension: 1 1/16 - 12 UN
Drain Port Style: Standard
Drain port Dimension: 9/16 - 18 UNF
Brake Release Port: None
Brake Release Port Dimension: None
Painted: None
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151B0176
Front bearing: Tapered roller bearing
Rear bearing: Tapered roller bearing
Gear wheel set: Standard
Check valve: No
Valve function: Integrated flushing valve (Orifice M6 x ø2,0)
Special Features Internal 1: Flushing valve - 6 bar
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
Activ: | No, Yes |
---|---|
Baureihe: | TMT V |
Drain Port Style: | Standard - motor flange |
Dust Seal: | Integrated in shaft seal, Standard |
Front Bearing: | Tapered roller bearing |
Mounting Flange: | 4 Bolt - Square, Special |
Packaging: | Single pack |
Port Dimension: | 1 1/16 - 12 UN, 9/16 - 18 UNF |
Port Style: | Side ported - offset |
Schluckvolumen: | 500 cm3/U |
Seal Kit: | 151B0176 |
Serie: | T-Series |
Shaft Seal: | NBR - Standard |
Shaft Size: | Dia. 1-1/2 inch - 3/8-16 UNC tap |
Shaft Style: | Splined - 17T |
Special Features Internal 1: | Flushing valve - 6 bar |
Valve Function: | Integrated hot oil shuttle valve (Orifice M6 x ?2,0) |
Design: | 0 |
Mounting Thread Dimension: | Pilot dia. 160 x 9 [6,30 x 0,35] - B.C. dia. 200 [7,87] ; Dia. 18 [0,71] |
Typenschl?ssel: | None |
Login