Danfoss 11018140 OMV 800 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11018140
Modelcode: None
Motorseries: O-Series
Basic Motor: OMV
Displacement: 800
Design Number: 2
Active: Yes
Replaced by: None
Mounting Flange: SAE C
Mounting Thread Dimension: None
Shaft Style: Tapered - Cone 1:8
Shaft Size: 2 1/4 inch tap
Shaft Key: 9/16 x 9/16 x 2 inch (B.S. 46)
Port Size: Side port
Port Dimension: 1 5/16 - 12 UN
Drain Port Style: Standard
Drain port Dimension: 9/16 - 18 UNF
Brake Release Port: None
Brake Release Port Dimension: None
Painted: None
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151B0129
Front bearing: Tapered roller bearing
Rear bearing: Tapered roller bearing
Gear wheel set: Standard
Check valve: Yes
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
| Activ: | Yes |
|---|---|
| Baureihe: | OMV |
| Drain Port Style: | Standard - Bearing housing |
| Dust Seal: | Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - C, Special |
| Packaging: | Single pack |
| Port Dimension: | 1 5/16 - 12 UN, 9/16 - 18 UNF |
| Port Style: | Side ported - offset |
| Schluckvolumen: | 800 cm3/U |
| Seal Kit: | 151B0129 |
| Serie: | O-Series |
| Shaft Key: | 9/16 x 9/16 x 2 inch (SAE J501) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 2-1/4 inch - 1 1/2-18 UNEF tap |
| Shaft Style: | Tapered - Cone 1:8 |
| Design: | 2 |
| Mounting Thread Dimension: | Pilot dia. 127 x 13,5 [5,00 x 0,53] - B.C. dia. 161,9 [6,37] ; Dia. 17,5 [0,69] |
| Typenschl?ssel: | None |
Login
