Danfoss 11033927 TMTW FL 630 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11033927
Modelcode: None
Motorseries: T-Series
Basic Motor: TMTW FL
Displacement: 630
Design Number: 0
Active: Yes
Replaced by: None
Mounting Flange: Spigot dia. 160 mm, BC dia. 194 mm
Mounting Thread Dimension: None
Shaft Style: Tapered - Cone 1:10
Shaft Size: 45 mm tap
Shaft Key: B12 x 8 x 28 mm (DIN 6885)
Port Size: Side port
Port Dimension: 1 1/16 - 12 UN
Drain Port Style: Standard
Drain port Dimension: 9/16 - 18 UNF
Brake Release Port: Standard
Brake Release Port Dimension: 7/16 - 20 UNF
Painted: None
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151Z2059
Front bearing: Tapered roller bearing
Rear bearing: None
Gear wheel set: Standard
Check valve: No
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Standard
| Activ: | No, Yes |
|---|---|
| Baureihe: | TMTW FL |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | Integrated in shaft seal plus Seal guard, Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 8 Bolt - Wheel |
| Packaging: | Single pack |
| Port Dimension: | 1 1/16 - 12 UN, 9/16 - 18 UNF |
| Port Style: | Side ported - offset |
| Schluckvolumen: | 630 cm3/U |
| Seal Kit: | 151Z2059 |
| Serie: | T-Series |
| Shaft Key: | B12 x 8 x 28 mm |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 45 mm - M30 x 2 tap |
| Shaft Style: | Tapered - Cone 1:10 |
| Design: | 0 |
| Mounting Thread Dimension: | Pilot dia. 159,8 x 8,7 [6,29 x 0,34] - B.C. dia. 194 [7,64] ; Dia. 15 [0,59] |
| Typenschl?ssel: | None |
Login
