Danfoss 11038470 TMT FLV 470 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11038470
Modelcode: None
Motorseries: T-Series
Basic Motor: TMT FLV
Displacement: 470
Design Number: 0
Active: Yes
Replaced by: None
Mounting Flange: Spigot dia. 180 mm, BC dia. 224 mm
Mounting Thread Dimension: None
Shaft Style: Tapered - Cone 1:10
Shaft Size: 45 mm tap
Shaft Key: B12 x 8 x 28 mm (DIN 6885)
Port Size: Side port
Port Dimension: G 3/4
Drain Port Style: Standard
Drain port Dimension: G 1/4
Brake Release Port: Standard
Brake Release Port Dimension: G 1/4
Painted: None
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151Z2059
Front bearing: Tapered roller bearing
Rear bearing: Tapered roller bearing
Gear wheel set: Standard
Check valve: No
Valve function: Integrated flushing valve (Orifice M6 x ø1,5)
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
| Activ: | No, Yes |
|---|---|
| Baureihe: | TMT FL V |
| Drain Port Style: | Standard - motor flange, Standard - mounting flange |
| Dust Seal: | Integrated in shaft seal, Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - Square, Special |
| Packaging: | Single pack |
| Port Dimension: | G 1/4, G 3/4 |
| Port Style: | Side ported - offset |
| Schluckvolumen: | 470 cm3/U |
| Seal Kit: | 151Z2059 |
| Serie: | T-Series |
| Shaft Key: | B12 x 8 x 28 mm |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 45 mm - M30 x 2 tap |
| Shaft Style: | Tapered - Cone 1:10 |
| Valve Function: | Integrated hot oil shuttle valve (Orifice M6 x ?1,5) |
| Design: | 0 |
| Mounting Thread Dimension: | Pilot dia. 180 x 9 [7,09 x 0,35] - B.C. dia. 224 [8,82] ; Dia. 18 [0,71] |
| Typenschl?ssel: | None |
Login
