Danfoss 11075159 TMT 500 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11075159
Modelcode: None
Motorseries: T-Series
Basic Motor: TMT
Displacement: 500
Design Number: 0
Active: Yes
Replaced by: None
Mounting Flange: Spigot dia. 125 mm, BC dia. 160 mm
Mounting Thread Dimension: None
Shaft Style: Cylindrical
Shaft Size: 40 mm ; M12 x 1,75 tap
Shaft Key: A12 x 8 x 70 mm (DIN 6885)
Port Size: Side port
Port Dimension: G 3/4
Drain Port Style: Standard
Drain port Dimension: G 1/4
Brake Release Port: None
Brake Release Port Dimension: None
Painted: None
Special Features External 1: Motor flange - hole for sensor
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151B0176
Front bearing: Tapered roller bearing
Rear bearing: Tapered roller bearing
Gear wheel set: Standard
Check valve: No
Valve function: None
Special Features Internal 1: Nut - 28 pulses per rev.
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
| Activ: | No, Yes |
|---|---|
| Baureihe: | TMT |
| Drain Port Style: | Standard - motor flange |
| Dust Seal: | Integrated in shaft seal, Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - Square, Special |
| Packaging: | Single pack |
| Port Dimension: | G 1/4, G 3/4 |
| Port Style: | Side ported - offset |
| Schluckvolumen: | 500 cm3/U |
| Seal Kit: | 151B0176 |
| Serie: | T-Series |
| Shaft Key: | A12 x 8 x 70 mm |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 40 mm - M12 tap |
| Shaft Style: | Straight |
| Special Features External 1: | Motor flange - hole for Speed sensor |
| Special Features External 2: | Nut - 28 pulses per rev. |
| Design: | 0 |
| Mounting Thread Dimension: | Pilot dia. 125 x 9 [4,92 x 0,35] - B.C. dia. 160 [6,30] ; Dia. 14 [0,55] |
| Typenschl?ssel: | None |
Login
