Danfoss 11111412 OMR NF 160 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11111412
Modelcode: None
Motorseries: O-Series
Basic Motor: OMR NF
Displacement: 160
Design Number: 5
Active: Yes
Replaced by: None
Mounting Flange: A2
Mounting Thread Dimension: None
Shaft Style: Cylindrical
Shaft Size: 25 mm ; M8 x 1,25 tap
Shaft Key: A8 x 7 x 32 mm (DIN 6885)
Port Size: Side port - Offset
Port Dimension: G 1/2
Drain Port Style: Standard
Drain port Dimension: G 1/4
Brake Release Port: Standard
Brake Release Port Dimension: G 1/4
Painted: Black (RAL 9005) - C2
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151-1287
Front bearing: Needle bearing
Rear bearing: Needle bearing
Gear wheel set: Standard
Check valve: Yes
Valve function: None
Special Features Internal 1: Brake - reduced holding torque
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
| Activ: | Yes |
|---|---|
| Baureihe: | OMR N F |
| Drain Port Style: | Standard - Piston housing |
| Dust Seal: | Standard |
| Front Bearing: | Needle roller bearing |
| Mounting Flange: | 2 Bolt - A, Special |
| Packaging: | Single pack |
| Painted: | Black - RAL 9005 |
| Port Dimension: | G 1/2, G 1/4 |
| Port Style: | Side ported - offset manifold (4 x M8) |
| Schluckvolumen: | 160 cm3/U |
| Seal Kit: | 151-1287 |
| Serie: | O-Series |
| Shaft Key: | A8 x 7 x 32 mm (DIN 6885) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 25 mm - M8 tap |
| Shaft Style: | Straight |
| Special Features External 1: | Brake - Reduced holding torque |
| Design: | 5 |
| Mounting Thread Dimension: | Pilot dia. 82,5 x 8,1 [3,25 x 0,32] - B.C. dia. 106,4 [4,19] ; Dia. 13,6 [0,53] |
| Typenschl?ssel: | None |
Login
