Danfoss 11131995 OMP N 40 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11131995
Modelcode: None
Motorseries: O-Series
Basic Motor: OMP N
Displacement: 40
Design Number: 7
Active: Yes
Replaced by: None
Mounting Flange: C
Mounting Thread Dimension: 3/8 - 16 UNC
Shaft Style: Cylindrical
Shaft Size: 1 inch ; 1/4-20 UNC tap
Shaft Key: Woodruff key 1/4 x 1 (SAE J502)
Port Size: Side port - Offset
Port Dimension: 7/8 - 14 UNF
Drain Port Style: Standard
Drain port Dimension: 7/16 - 20 UNF
Brake Release Port: None
Brake Release Port Dimension: None
Painted: Black (RAL 9005) - C2
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151-1275
Front bearing: Needle bearing
Rear bearing: Needle bearing
Gear wheel set: Standard
Check valve: Yes
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Standard
| Activ: | Yes |
|---|---|
| Baureihe: | OMP N |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Needle roller bearing |
| Mounting Flange: | 4 Bolt - Square |
| Packaging: | Single pack |
| Painted: | Black - RAL 9005 |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - offset manifold (4 x M8) |
| Schluckvolumen: | 40 cm3/U |
| Seal Kit: | 151-1275 |
| Serie: | O-Series |
| Shaft Key: | Woodruff key 1/4 x 1 inch (SAE J502) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 1 inch - 1/4-20 UNC tap |
| Shaft Style: | Straight |
| Design: | 7 |
| Mounting Thread Dimension: | Pilot dia. 44,4 x 2,5 [1,75 x 0,10] - B.C. dia. 82,6 [3,25] ; 3/8-16 UNC |
| Typenschl?ssel: | None |
Login
