Danfoss 11177142 OMPW N 160 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11177142
Modelcode: None
Motorseries: O-Series
Basic Motor: OMPW N
Displacement: 160
Design Number: 7
Active: Yes
Replaced by: None
Mounting Flange: Wheel
Mounting Thread Dimension: 3/8 - 16 UNC
Shaft Style: Tapered - Cone 1:8
Shaft Size: 1 inch tap
Shaft Key: Woodruff key 3/16 x 3/4 (SAE J502)
Port Size: Side port - Aligned
Port Dimension: 7/8 - 14 UNF
Drain Port Style: None
Drain port Dimension: None
Brake Release Port: None
Brake Release Port Dimension: None
Painted: None
Special Features External 1: Pilot flange - 6 x M6 thread for ext. brake
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard - HPS
Shaft Seal: HNBR - HPS
Seal-Kit: 151-1279
Front bearing: Needle bearing
Rear bearing: Needle bearing
Gear wheel set: Standard
Check valve: Yes
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
| Activ: | Yes |
|---|---|
| Baureihe: | OMPW N |
| Dust Seal: | Standard |
| Front Bearing: | Needle roller bearing |
| Mounting Flange: | 4 Bolt - Wheel, Special |
| Packaging: | Single pack |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - aligned |
| Schluckvolumen: | 160 cm3/U |
| Seal Kit: | 151-1279 |
| Serie: | O-Series |
| Shaft Key: | Woodruff key 3/16 x 3/4 inch (SAE J502) |
| Shaft Seal: | HNBR - High pressure |
| Shaft Size: | Dia. 1 inch - 3/4-20 UNEF tap |
| Shaft Style: | Tapered - Cone 1:8 |
| Special Features External 1: | Pilot flange - 6 x M6 thread for ext. brake |
| Design: | 7 |
| Mounting Thread Dimension: | Pilot dia. 80 x 7,3 [3,15 x 0,29] - B.C. dia. 103 [4,06] ; 3/8-16 UNC |
| Typenschl?ssel: | None |
Login
