Danfoss 11195763 OMRW NF 375 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11195763
Modelcode: None
Motorseries: O-Series
Basic Motor: OMRW NF
Displacement: 375
Design Number: 5
Active: Yes
Replaced by: None
Mounting Flange: Wheel
Mounting Thread Dimension: None
Shaft Style: Tapered - Cone 1:8
Shaft Size: 1 1/4 inch tap
Shaft Key: 5/16 x 5/16 x 1 1/4 inch (B.S. 46)
Port Size: Side port - Aligned
Port Dimension: 7/8 - 14 UNF
Drain Port Style: Standard
Drain port Dimension: 7/16 - 20 UNF
Brake Release Port: Standard
Brake Release Port Dimension: 7/16 - 20 UNF
Painted: None
Special Features External 1: Pilot flange - mounted with 11 screws
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: None
Front bearing: Needle bearing
Rear bearing: Needle bearing
Gear wheel set: Standard
Check valve: Yes
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Special
| Activ: | Yes |
|---|---|
| Baureihe: | OMRW N F |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - Piston housing |
| Dust Seal: | Standard |
| Front Bearing: | Needle roller bearing |
| Mounting Flange: | 4 Bolt - Wheel, Special |
| Packaging: | Single pack |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - aligned |
| Schluckvolumen: | 375 cm3/U |
| Serie: | O-Series |
| Shaft Key: | 5/16 x 5/16 x 1-1/4 inch (B.S. 46) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 1-1/4 inch - 1-20 UNEF tap |
| Shaft Style: | Tapered - Cone 1:8 |
| Special Features External 1: | Pilot flange - mounted with 11 screws |
| Design: | 5 |
| Mounting Thread Dimension: | Pilot dia. 82,5 x 9,2 [3,25 x 0,36] / 127 x 7,8 [5 x 0,31] - B.C. dia. 147,6 [5,81] ; Dia. 13,5 [0,53] |
| Typenschl?ssel: | None |
Login
