Danfoss 11199277 RE 511 Series 540 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11199277
Modelcode: 511540B1123AAAVGS
Motorseries: R-Series
Basic Motor: RE 511 Series
Displacement: 540
Design Number: None
Active: Yes
Replaced by: None
Mounting Flange: SAE B Mount Brake
Mounting Thread Dimension: None
Shaft Style: Splined - 14T
Shaft Size: 1 1/4 inch ; 5/8-18 UNF tap
Shaft Key: None
Port Size: Side port
Port Dimension: Must Use "LB" Option
Drain Port Style: None
Drain port Dimension: None
Brake Release Port: None
Brake Release Port Dimension: None
Painted: Black
Special Features External 1: Flodraulic brake with 4/4 4/4 disc stack
Special Features External 2: None
Special features External 3: None
Dust Seal: None
Shaft Seal: Viton - Standard
Seal-Kit: None
Front bearing: None
Rear bearing: None
Gear wheel set: None
Check valve: Yes
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: None
| Activ: | No, Yes |
|---|---|
| Baureihe: | RE 511 |
| Brake Release Port: | Brake housing |
| Brake Release Port Dimension: | 1 x 7/16 - 20 UNF |
| Dust Seal: | Standard |
| Front Bearing: | Needle roller bearing |
| Mounting Flange: | 2 Bolt - B |
| Packaging: | Single pack |
| Painted: | Black |
| Port Dimension: | 7/8 - 14 UNF |
| Port Style: | Side ported - aligned |
| Replacement: | No Info |
| Schluckvolumen: | 540 cm3/U |
| Serie: | R - Series |
| Shaft Seal: | FPM (viton) - High pressure |
| Shaft Size: | Dia. 1-1/4 inch - 5/8-18 UNF tap |
| Shaft Style: | Splined - 14T |
| Special Features External 1: | Painted Mounting Surface |
| Special Features External 2: | Brake - With special stack up 4/4 4/4 - decreased holding torque |
| Mounting Thread Dimension: | Pilot dia. 101,6 x 9,5 [4,00 x 0,37] - B.C. dia. 146,1 [5,75] ; Dia. 13,1 [0,52] |
| Typenschl?ssel: | 511540B1123AAAVGS, None |
Login
