Danfoss 11199336 DT 700 Series 2100 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11199336
Modelcode: 7002K1C8741AAAAAS
Motorseries: D-Series
Basic Motor: DT 700 Series
Displacement: 2100
Design Number: None
Active: Yes
Replaced by: None
Mounting Flange: 4-Hole SAE C Mount (5" Pilot)
Mounting Thread Dimension: None
Shaft Style: Cylindrical
Shaft Size: 50 mm ; M12 x 1,25 tap
Shaft Key: None
Port Size: SIDE PORT
Port Dimension: Aligned G 3/4
Drain Port Style: None
Drain port Dimension: G 1/4 Drain (D)
Brake Release Port: None
Brake Release Port Dimension: None
Painted: Black
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: None
Shaft Seal: Viton - Standard
Seal-Kit: None
Front bearing: None
Rear bearing: None
Gear wheel set: None
Check valve: No
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: None
| Activ: | No, Yes |
|---|---|
| Baureihe: | DT 700 |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Cylindrical roller bearing, Needle roller bearing |
| Mounting Flange: | 4 Bolt - C |
| Packaging: | Single pack |
| Painted: | Black |
| Port Dimension: | G 1/4, G 3/4 |
| Port Style: | Side ported - radial |
| Replacement: | No Info |
| Schluckvolumen: | 2100 cm3/U |
| Serie: | D - Series |
| Shaft Key: | 14 x 9 x 56 mm |
| Shaft Seal: | FPM (viton) - Low pressure |
| Shaft Size: | Dia. 50 mm - M12 x 1.25 tap |
| Shaft Style: | Straight |
| Special Features External 1: | Painted Mounting Surface |
| Mounting Thread Dimension: | Pilot dia. 126,9 x 7,3 [5,00 x 0,29] / 126,9 x 2,5 [5,00 x 0,10] - B.C. dia. 161,9 [6,38] ; Dia. 16,7 [0,66] |
| Typenschl?ssel: | 7002K1C8741AAAAAS, None |
Login
