Danfoss 11199383 DT 710 Series 750 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11199383
Modelcode: 710750W8651AAAAAS
Motorseries: D-Series
Basic Motor: DT 710 Series
Displacement: 750
Design Number: None
Active: Yes
Replaced by: None
Mounting Flange: 4-Hole Wheel Brake Mount
Mounting Thread Dimension: None
Shaft Style: Tapered - Cone 1:10
Shaft Size: 55 mm tap
Shaft Key: None
Port Size: SIDE PORT
Port Dimension: Aligned 1 1/16-12 UN
Drain Port Style: None
Drain port Dimension: 7/16-20 UNF Drain (D)
Brake Release Port: None
Brake Release Port Dimension: None
Painted: Black
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: None
Shaft Seal: Viton - Standard
Seal-Kit: None
Front bearing: None
Rear bearing: None
Gear wheel set: None
Check valve: No
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: None
| Activ: | No, Yes |
|---|---|
| Baureihe: | DT 710 |
| Brake Release Port: | Brake housing |
| Brake Release Port Dimension: | 2 x 7/16 - 20 UNF |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Cylindrical roller bearing |
| Mounting Flange: | 4 Bolt - Wheel |
| Packaging: | Single pack |
| Painted: | Black |
| Port Dimension: | 1 1/16 - 12 UN |
| Port Style: | Side ported - aligned |
| Replacement: | No Info |
| Schluckvolumen: | 750 cm3/U |
| Serie: | D - Series |
| Shaft Key: | 1/2 x 7/16 x 1-1/4 inch |
| Shaft Seal: | NBR - Low pressure |
| Shaft Size: | Dia. 55 mm - M42 x 3 tap |
| Shaft Style: | Tapered - Cone 1:10 |
| Special Features External 1: | Painted Mounting Surface |
| Mounting Thread Dimension: | Pilot dia. 180,7 x 8 [7,11 x 0,32] - B.C. dia. 209,6 [8,25] ; 16,6 |
| Typenschl?ssel: | 710750W8651AAAAAS, None |
Login
