Danfoss 11199436 HB 311 Series 400 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 11199436
Modelcode: 311400W8520AAAABS
Motorseries: H-Series
Basic Motor: HB 311 Series
Displacement: 400
Design Number: None
Active: Yes
Replaced by: None
Mounting Flange: 4-Hole Motor/Brake
Mounting Thread Dimension: None
Shaft Style: Cylindrical
Shaft Size: 1 1/4 inch ; 5/8-18 UNF tap
Shaft Key: None
Port Size: SIDE PORT
Port Dimension: 9/16-18 UNF Offset
Drain Port Style: None
Drain port Dimension: None
Brake Release Port: None
Brake Release Port Dimension: None
Painted: Black
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: None
Shaft Seal: Viton - Standard
Seal-Kit: None
Front bearing: None
Rear bearing: None
Gear wheel set: None
Check valve: Yes
Valve function: None
Special Features Internal 1: Internal Drain
Special Features Internal 2: None
Packaging: Single pack
Option Type: None
| Activ: | Yes |
|---|---|
| Baureihe: | HB 311 |
| Brake Release Port: | Brake housing |
| Brake Release Port Dimension: | 2 x 7/16 - 20 UNF |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Integrated into bearing, Standard |
| Front Bearing: | Needle roller bearing |
| Mounting Flange: | 4 Bolt - Wheel |
| Packaging: | Single pack |
| Painted: | Black |
| Port Dimension: | 9/16 - 18 UNF |
| Port Style: | Side ported - offset |
| Replacement: | No Info |
| Schluckvolumen: | 400 cm3/U |
| Serie: | H - Series |
| Shaft Key: | 8 x 7 x 35 mm |
| Shaft Seal: | FPM (viton) - Standard |
| Shaft Size: | Dia. 1-1/4 inch - 5/8-18 UNF tap |
| Shaft Style: | Straight |
| Special Features External 1: | Painted Mounting Surface |
| Mounting Thread Dimension: | Pilot dia. 82,5 x 39,8 [3,25 x 1,57] - B.C. dia. 147,6 [5,81] ; 1/2-13 UNC |
| Typenschl?ssel: | 311400W8520AAAABS, None |
Login
