Danfoss 151B2219 OMT FH 500 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 151B2219
Modelcode: None
Motorseries: O-Series
Basic Motor: OMT FH
Displacement: 500
Design Number: 2
Active: Yes
Replaced by: None
Mounting Flange: Brake-Standard ; PD 5.0 in ; BC 6.4 in
Mounting Thread Dimension: None
Shaft Style: Splined - 17T
Shaft Size: 1 1/2 inch ; 3/8-16 UNC tap
Shaft Key: None
Port Size: Side port
Port Dimension: 1 1/16 - 12 UN
Drain Port Style: Standard
Drain port Dimension: 9/16 - 18 UNF
Brake Release Port: Standard
Brake Release Port Dimension: 7/16 - 20 UNF
Painted: None
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151B0154
Front bearing: Tapered roller bearing
Rear bearing: Tapered roller bearing
Gear wheel set: Standard
Check valve: No
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Standard
| Activ: | No, Yes |
|---|---|
| Baureihe: | OMT FH |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - Bearing housing, Standard - motor flange |
| Dust Seal: | Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - C |
| Packaging: | Single pack |
| Port Dimension: | 1 1/16 - 12 UN, 9/16 - 18 UNF |
| Port Style: | Side ported - offset |
| Schluckvolumen: | 500 cm3/U |
| Seal Kit: | 151B0154 |
| Serie: | O-Series |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 1-1/2 inch - 3/8-16 UNC tap |
| Shaft Style: | Splined - 17T |
| Design: | 2 |
| Mounting Thread Dimension: | Pilot dia. 127 x 10 [5,00 x 0,39] - B.C. dia. 161,9 [6,37] ; Dia. 14,4 [0,57] |
| Typenschl?ssel: | None |
Login
