Danfoss 151F6012 TMKW 250 Hydraulic Motor
Manufacturer: Danfoss
Country of origin: Danmark
Condition: NEW with original packaging
Materialnumber: 151F6012
Modelcode: None
Motorseries: T-Series
Basic Motor: TMKW
Displacement: 250
Design Number: 0
Active: Yes
Replaced by: None
Mounting Flange: Wheel
Mounting Thread Dimension: None
Shaft Style: Tapered - Cone 1:8
Shaft Size: 1 1/2 inch tap
Shaft Key: 3/8 x 3/8 x 1 inch (B.S. 46)
Port Size: Side port
Port Dimension: 1 1/16 - 12 UN
Drain Port Style: Standard
Drain port Dimension: 7/16 - 20 UNF
Brake Release Port: None
Brake Release Port Dimension: None
Painted: Black
Special Features External 1: None
Special Features External 2: None
Special features External 3: None
Dust Seal: Standard
Shaft Seal: NBR - Standard
Seal-Kit: 151F0141
Front bearing: Tapered roller bearing
Rear bearing: Tapered roller bearing
Gear wheel set: Standard
Check valve: No
Valve function: None
Special Features Internal 1: None
Special Features Internal 2: None
Packaging: Single pack
Option Type: Standard
| Activ: | No, Yes |
|---|---|
| Baureihe: | TMKW |
| Drain Port Dimension: | 7/16 - 20 UNF |
| Drain Port Style: | Standard - end cover |
| Dust Seal: | Standard |
| Front Bearing: | Tapered roller bearing |
| Mounting Flange: | 4 Bolt - Wheel |
| Packaging: | Single pack |
| Painted: | Black |
| Port Dimension: | 1 1/16 - 12 UN |
| Port Style: | Side ported - offset |
| Schluckvolumen: | 250 cm3/U |
| Seal Kit: | 151F0141 |
| Serie: | T-Series |
| Shaft Key: | 3/8 x 3/8 x 1 inch (B.S. 46) |
| Shaft Seal: | NBR - Standard |
| Shaft Size: | Dia. 1-1/2 inch - 1-20 UNEF tap |
| Shaft Style: | Tapered - Cone 1:8 |
| Design: | 0 |
| Mounting Thread Dimension: | Pilot dia. 107,9 x 6,4 [4,25 x 0,25] / 126,9 x 3,6 [5 x 0,14] - B.C. dia. 147,6 [5,81] ; Dia. 13,6 [0,54] |
| Typenschl?ssel: | None |
Login
